How can we sue the Bottle filling and capping machine?

The Bottle filling and capping machine is a filling equipment specially designed for the new type of oral liquid easy-pull bottle. The design is reasonable, the structure is simple, and the operation is convenient.

How to properly adjust the components of the Bottle filling and capping machine?

How to use the Bottle filling and capping machine correctly?

What are the installation precautions for the Bottle filling and capping machine?

How to properly adjust the components of the Bottle filling and capping machine?

The Bottle filling and capping machine is adjusted by the filling component. The function of the filling component is to transport the liquid medicine to each easy-to-pull bottle in time through the filling device, the one-way valve and the needle. The time should also be appropriate.

a. Adjust the cam A of the side to rotate forward or reversely so that the needle is inserted into the bottle mouth just after the empty bottle enters the toothed position. and lift the needle before leaving the toothed position.

b. Perfusion time adjustment: Turn cam B forward or reverse to adjust the injection to start immediately after the needle enters the bottle mouth, and stop the injection before the needle leaves the bottle mouth.

c. Adjustment of liquid volume: Loosen nut 1 and adjust the ejector rod in the direction of D, and the liquid volume will increase; adjust the liquid volume in the direction of C to reduce the liquid volume, while adjusting the nut 2 in the direction of F to reduce the volume of liquid, and adjust in the direction of E to increase the liquid volume When adjusting, pay attention to the limit position of the drug injector to avoid damage to the drug injector. Generally, it is advisable that the bottom of the drug injector reaches the drug spit not less than 15 mm, and the longer the perfusion time, the better.

How to use the Bottle filling and capping machine correctly?

1. Because the Bottle filling and capping machine is an automatic machine, the dimensions of the pop-up bottle, bottle pad and bottle cap are required to be unified.

2. Before driving, you must use the crank handle to turn the machine to see if there is any abnormality in its rotation.

3. When adjusting the machine, the tools should be used properly. It is strictly forbidden to use too large tools or excessive force to remove parts to avoid damaging the parts or affecting the performance of the machine.

4. Whenever the Bottle filling and capping machine is adjusted, in fact, tighten the loosened screws and use the crank handle to turn the machine to see if its action meets the requirements before driving.

5. Bottle filling and capping machine must be kept clean. It is strictly forbidden to have oil stains, liquid medicine or glass debris on the machine, so as to avoid machine damage, so it must:

(1) During the production process of the machine, the liquid medicine or glass debris should be removed in time.

⑵Before the shift, all parts of the machine surface should be cleaned once, and clean lubricating oil should be added to each activity department.

(3) It should be scrubbed once a week, especially the places that are not easy to be cleaned in ordinary use or blow it with compressed air.

What are the installation precautions for the Bottle filling and capping machine?

1. After the Bottle filling and capping machine is unpacked, first check whether the random technical information is complete and whether the machine is damaged during transportation, so as to solve it in time.

2. Install and adjust the feeding and discharging components according to the outline diagrams in this manual.

3. Add new lubricating oil to each lubricating point.

4. Use the crank handle to turn the machine to check whether the machine is running in the correct direction (counterclockwise when facing the main shaft of the motor). The machine must be protected and grounded.

WeiShu Machinery Technology (Shanghai) Co., Ltd. has focused on the development and production of Bottle filling and capping machines for several years. And it commits to provide perfect service for every customer from all over the world.