What is the production process of the water production line?

We all drink mineral water in our lives. For example, when it is too hot in summer and we feel thirsty outside, we will buy a bottle of mineral water in the store to drink, which is convenient and thirst-quenching! In fact, the existence of mineral water brings convenience and safety to our life, because the water quality of mineral water is very guaranteed, unlike the tap water in our home that may be subject to secondary pollution. So how is mineral water produced? What role does the water production line play?

What is the production process of the water production line?

What are the characteristics of the products produced by the water production line?

What is the role of the blowing equipment in the water production line?

What is the production process of the water production line?

The production process of water production line is through water source water → coarse filtration → fine filtration → sterilization → filling and capping → light inspection → finished product ↑ bottle (barrel) and its cover cleaning and disinfection. After such processing, we can get the natural water seen on the market, but natural water is not our first choice for healthy drinking water. If conditions permit, we can choose natural mineral water as our regular drinking water. Natural mineral water refers to water that is naturally gushed from the depths of the ground or collected by drilling, contains a certain amount of minerals, trace elements or other components, and is uncontaminated in a certain area and preventive measures are taken to avoid pollution. Its chemical composition, Dynamic indicators such as flow and water temperature are relatively stable within the range of natural periodic fluctuations. The difference from natural water is that natural water needs to meet one or more of the eight boundary indicators specified in the national standard to be called natural mineral water.

What are the characteristics of the products produced by the water production line?

Mineral water produced by the water production line is water containing dissolved minerals or more gases. The nine limit indicators specified in the standard include lithium, strontium, zinc, selenium, bromine, iodine, metasilicic acid, free carbon dioxide and total dissolved solids. One or more of the nine limited indicators in mineral water must meet the requirements of the limited indicators, and the required contents are (unit: mg/L): lithium, strontium, zinc, iodine 2, selenium ≥ 0.01, bromine ≥ 1.0, partial Silicic acid ≥ 25, free carbon dioxide ≥ 250, total soluble solids ≥ 1000. Most of the mineral waters on the market belong to the strontium (SR) type and the metasilicic acid type, and there are also mineral waters containing other minerals.

What is the role of the blowing equipment in the water production line?

The bottle blowing equipment in the water production line is mainly used to blow the preform into a bottle. First, the preform enters the oven for heating, and the heat source is provided by the lamp tube. During the heating process, the preform revolves and rotates to ensure that the surface of the preform is evenly heated. Make the preform have a certain plasticity. After entering the bottle mold, the preform is blown into a bottle through the filtered high-pressure gas.

WeiShu Machinery Technology (Shanghai) Co., Ltd. has committed to fulfilling all the requirements of water production line. And it welcomes global customers to purchase.